|
2007-10 Toyota Tacoma Lift
Kit 3" front and 1" rear
This 3" lift and level
kit is the newest available for the 2007 Toyota Tacoma. The kit
levels the truck by lifting the front 3" - this
creates the lifted level look everyone loves but still retains all
the stock suspension qualities Toyota spent so much time engineering
into their new 2007 Tacoma 4x2 and 4x4 pickups.
Our factory ride lift and level kit fixes the "tail in the air"
stance that new 2007 Toyota Tacoma 4x2 and 4x4 pickup trucks come
with.
Included is a differential drop so that on the 4x4 models your CV
joints would last as long as Toyota designed them too. Also
included is a bump stop drop so that the shock doesn’t use the
internal bump stop, that the bump stop on the frame is doing the job
it was designed to do.
The U-bolts are cad
plated and the rear leaf blocks are welded and powder coated so that
you truck will always look new and the finish quality is the same as
the factory parts Toyota used on the new Tacoma 4x2 and 4x4 pickups.
This kit will:
Increase ft & rr ground clearance over traditional bracket type lift
kits even without the use of larger wheels and tires for those
interested in getting the most out of their truck for recreational
or construction use.
Ride Quality -
this kit does not change preload and maintains the stock smooth
ride. Other kits get their lift from increasing preload on the
spring. This means that the ride is harsher and less compliant. This
is a big issue for many consumers.
Allows for up to 33" (LT 285/70R17) or (LT285/75R16) tires to fit without rubbing
(wheel spacers may be req'd for upper control arm clearance)-
match this kit with a
new set of BFG All Terrain KO tires - click here to view
2007-10 Toyota Tundra Lift
Kit 3" front and 1" rear
This 3" lift and level
kit is the newest available for the 2007 Toyota Tundra. The kit
levels the truck by lifting the front 3" - this
creates the lifted level look everyone loves but still retains all
the stock suspension qualities Toyota spent so much time engineering
into their new 2007 Tundra 4x2 and 4x4 pickups.
Our factory ride lift and level kit fixes the "tail in the air"
stance that new 2007 Toyota Tundra 4x2 and 4x4 pickup trucks come
with.
Included is a differential drop so that on the 4x4 models your CV
joints would last as long as Toyota designed them too.
The U-bolts are cad
plated and the rear leaf blocks are welded and powder coated so that
you truck will always look new and the finish quality is the same as
the factory parts Toyota used on the new Tundra 4x2 and 4x4 pickups.
This kit will:
Increase ft & rr ground clearance over traditional bracket type lift
kits even without the use of larger wheels and tires for those
interested in getting the most out of their truck for recreational
or construction use.
Ride Quality -
this kit does not change preload and maintains the stock smooth
ride. Other kits get their lift from increasing preload on the
spring. This means that the ride is harsher and less compliant. This
is a big issue for many consumers.
Allows for up to 33" (LT 285/70R17) or (LT
285/65R18) or(LT285/55R20) tires to fit without rubbing
(wheel spacers may be req'd for upper control arm clearance)-
match this kit with a
new set of BFG All Terrain KO tires - click here to view
2007-
09 FJ Cruiser
Each 3" kit contains two
strut mounts (including nuts and studs), as well as BOLT-IN spacers
for the rear. Our exclusive BOLT-IN system ads peace of mind to your
truck - no loose plastic spacers here.
Allows fitting of up to 33" tires (285/70 x 17) on stock offset
wheels.
This kit will:
Increase ft & rr ground clearance over traditional bracket type lift
kits even without the use of larger wheels and tires for those
interested in getting the most out of their truck for recreational
or construction use.
Ride Quality -
this kit does not change preload and maintains the stock smooth
ride. Other kits get their lift from increasing preload on the
spring. This means that the ride is harsher and less compliant. This
is a big issue for many consumers.
Allows for up to 33" (LT 285/70R17) or (LT285/75R16) tires to fit without rubbing
(wheel spacers may be req'd for upper control arm clearance)-
match this kit with a
new set of BFG All Terrain KO tires - click here to view
2003- 09 4-Runner
This 3" lift and level
kit is the one to use if your looking to fit larger wheels and
tires, increase ground clearance and just enhance the look of your
2003-2007 Toyota 4Runner 4x2 or 4x4 with or without X-Reas
Suspension.
The kit levels the SUV by lifting the front 3" and the rear 1.25"
this creates the lifted level look everyone loves but still retains
all the stock suspension qualities Toyota spent so much time
engineering into their 2003-2007 4Runner 4x2 and 4x4 SUV’s.
We engineered this kit to be a full 3" and did the detail work to
make sure your 2007 Toyota 4-Runner 4x2 or 4x4 not only looks great,
but all the engineering, reliability and quality you have come to
know with Toyota products is still first and foremost.
This kit is designed to work with Toyota’s X-Reas suspension system,
not around it! The 2003-2008 Toyota 4Runner 4x2 and 4x4 lift
and level kit installs in 2-3 hours, doesn't sacrifice the smooth
stock ride quality. Our kit is made in the USA out of the finest
laser cut - Made in the USA steel.
Allows fitting of up to 33" tires (285/70 x 17) on stock offset
wheels.
Allows for up to 33" (LT 285/70R17) or (LT285/75R16) tires to fit without rubbing
(wheel spacers may be req'd for upper control arm clearance)-
match this kit with a
new set of BFG All Terrain KO tires - click here to view
2004-
09 Titan
This
kit is now a 2" kit with upper control arm bumpstop kit and
blocks included. It lifts the front 2" and the rear 1".
100% made in the USA 1/4" steel construction, laser cut and welded
to precision tolerances. Each 2" kit contains two strut mounts
(including studs and nuts), rear blocks, u-bolts, hardware, bump
stops & brackets.
Lifts the front of the truck 2" and the rear 1" . Allows
fitting of up to 33" tires (285/70 x 17) on stock offset wheels.
Increases ground clearance over traditional bracket type lift kits
even without the use of larger wheels and tires for those interested
in getting the most out of there truck for recreational or
construction use.
Ride Quality - The Truxxx kit does not change preload and maintains
the stock smooth ride. Other kits get their lift from increasing
preload on the spring. This means that the ride is harsher and less
compliant. This is a big issue for many consumers.
Allows for up to 33" tires: (LT 285/65R18) or
(LT285/70R17) tires to fit without rubbing
-
match this kit with a
new set of BFG All Terrain KO tires - click here to view
2005-10
Frontier/Suzuki Equator
This
TRUXXX 3" Lift Kit works with all models of 2005 - 2010 4x2 and 4x4
Nissan Frontier and 2008 - 2010 Suzuki Equator Pickups
3"
front, 1" rear lift with NO CHANGE in OEM ride quality, we have a 3D
modeled design optimizing Factory specs and have created a
mathematically engineered and road tested design to make your truck
work it's best!
Increases ground clearance over traditional bracket type lift kits
even without the use of larger wheels and tires for those interested
in getting the most out of there truck for recreational or
construction use.
Allows for up to 33" tires: (LT 285/65R18) or
(LT285/70R17) tires to fit without rubbing
-
match this kit with a
new set of BFG All Terrain KO tires - click here to view
|
